Vacuum laminating machine laminating machine manufacturers to tell you, is a kind of plastic film coated with adhesive, and the paper substrate printed by rubber roller and the heating roller pressure close together, one form of paper and plastic products. It can be classified into the coating type laminating machine and pre coating laminating machine, after printing film, the plastic film surface with a thin layer of transparent, surface smooth and light, not only improves the print gloss and fastness, prolong the service life of printed products, so in the film, how can reduce the amount of film? Let me introduce you to Xiao bian.
The amount of film used in laminating machine mainly depends on the operation level, so it is generally recommended:
1. to be built, the product must be straight. The paper should deal with the uneven straight paper with "lotus leaf" and "tight edge". "Lotus leaf" paper can be baked, the "tight edge" paper can be hung dry treatment.
2 must be dry before the imprinted film, otherwise it will cause blistering or galling phenomenon.
3., printing as little as possible powder, otherwise it will cause the powder at the place empty bubbles. In the film before the dusting off, print many of the clothes can be hanging to print less powder, can be constructed to wipe.
The 4 film should also pay attention to the direction of paper silk thread, especially thick paper, reduce paper by rolling stretch curl phenomenon.
The above is the film laminating machine to reduce the amount of film recommended when the relevant introduction, and I hope to help you.